Funkwerk W1002 User Manual

Field Description
Remote ID The peer ID is displayed here.
Exchange Type The exchange type is entered here.
Authentication Method The authentication method is displayed here.
MTU The current MTU (Maximum Transfer Unit) is displayed here.
Alive Check The alive check method is displayed here.
IKE (Phase 1) SAs (x)
Role / Algorithm / Life-
time remaining / State
The parameters of the IKE (Phase 1) SAs are displayed here.
Messages The system messages for this IPSec tunnel are displayed here.
19.2.2 IPSec Statistics
In the Monitoring ->IPSec->IPSec Statistics menu, statistical values for all IPSec tunnels
are shown.
Fig. 163: Monitoring->IPSec->IPSec Statistics
The Monitoring->IPSec->IPSec Statistics menu consists of the following fields:
Field in the menu IPSec Statistics Licenses
Field Description
IPSec Tunnels Shows the IPSec licenses currently in use (In use) and the
maximum number of licenses usable (Maximum).
19 Monitoring Funkwerk Enterprise Communications GmbH
356 bintec W1002/W1002n/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English