Chapter 3 Installation
Caution
Please read the safety notices carefully before installing and starting up your device.
These are supplied with the device.
Refer to chapter Technical data on page 26.
3.1 Setting Up and Connecting
Note
All you need for this are the cables and antennas supplied with the equipment.
The device can be fitted with various antenna systems. External, screw-on standard
antennas can be used (optional).
The access points of the bintec WI series can be mounted on a mast (indoor and out-
door version) or DIN rail (indoor version only). Optional theft protection is also avail-
able for the indoor and outdoor versions.
For the bintec WI series devices, a screw terminal bar is included as standard for
power supply.
Caution
The use of the wrong mains adapter may damage your device. Only use the mains ad-
aptor supplied (only for bintec W1002, bintec W1002n and bintec W2002). If you re-
quire foreign adapters/mains units, please contact our funkwerk service.
3 Installation Funkwerk Enterprise Communications GmbH
6 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
