Funkwerk W1002 User Manual

Tip
With multicast, the focus is on excluding data traffic from unwanted multicast groups.
Note that if forwarding is combined with IGMP, the packets can be forwarded to the
groups specified in the forwarding request.
12.5.1 Forwarding
In this menu, you specify which multicast groups are always forwarded between the inter-
faces of your device.
12.5.1.1 New
Choose the New button to create forwarding rules for new multicast groups.
Fig. 90: Routing->Multicast->Forward-> /New
The Routing->Multicast->Forward-> /New menu consists of the following fields:
Fields in the Forward Basic Parameters menu
Field Description
All Multicast Groups Select whether all multicast groups, i.e. the complete multicast
address range 224.0.0.0/4, are to be forwarded from the defined
Source Interface to the defined Destination Interface To do
12 Routing Funkwerk Enterprise Communications GmbH
202 bintec W1002/W1002n/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English