Funkwerk W1002 - Chapter 6 Technical Data; Bintec W1002, Bintec W1002 N and Bintec W2002; Scope of Supply; General Product Features

Chapter 6 Technical data
In this chapter, all hardware characteristics of the devices bintec W1002, W1002n, W2002,
WI1040, WI2040, WI3040, WI1065, WI2065 and WI3065 are summarised.
6.1 bintec W1002, bintec W1002n and bintec W2002
6.1.1 Scope of supply
Your device is supplied with the following parts:
• Cable sets/mains unit:
- Ethernet cable (RJ-45, STP)
- Plug-in power pack (12 V/230 V)
• Self-adhesive feet to allow the device to be used as a desktop device
• Installation material
• Antennas:
- 2 external standard antennas to be screwed on (for bintec W1002)
- 3 external standard antennas to be screwed on (for bintec W1002n)
- 4 external standard antennas to be screwed on (for bintec W2002)
• CD
• Documentation:
- User's Guide (on CD)
- Quick Install Guide (printed)
- R&TTE Compliance Information (printed)
- Safety notices (printed)
6.1.2 General Product Features
The general product features cover performance features and the technical prerequisites
for installation and operation of your device.
6 Technical data Funkwerk Enterprise Communications GmbH
26 bintec W1002/W1002n/W2002/WIx040/WIx065