Funkwerk W1002 User Manual

Field Description
Enter the IP address of the host or a network address and the
related netmask.
The default value is 0.0.0.0.
Address Range Only if Address Type = Address Range
Enter the start and end IP address of the range.
15.3.2 Groups
In the Firewall -> Addresses -> Groups menu, a list of all configured address groups is
shown.
You can group together addresses. This makes it easier to configure firewall rules.
15.3.2.1 New
Choose the New button to set up new address groups.
Fig. 122: Firewall->Addresses->Groups->New
The Firewall->Addresses->Groups->New menu consists of the following fields:
Fields in the Groups Basic Parameters menu
15 Firewall Funkwerk Enterprise Communications GmbH
286 bintec W1002/W1002n/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English