Funkwerk W1002 User Manual

15.3.1 Address list
In the Firewall -> Addresses -> Address List menu, a list of all configured addresses is
shown.
15.3.1.1 New
Choose the New button to set up new addresses.
Fig. 121: Firewall->Addresses->Address List->New
The Firewall->Addresses->Address List->New menu consists of the following fields:
Fields in the Address List Basic Parameters menu
Field Description
Description Enter the desired description of the address.
Address Type Select the type of address you want to specify.
Possible values:
• Address / Subnet (default value): Enter an IP address
with subnet mask.
• Address Range: Enter an IP address range with a start and
end address.
Address / Subnet Only if Address Type = Address / Subnet
Funkwerk Enterprise Communications GmbH
15 Firewall
bintec W1002/W1002n/W2002/WIx040/WIx065 285

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English