Funkwerk W1002 User Manual

19.4.5 Client Links
In the Monitoring -> WLAN -> Client Links menu, the current values and activities of the
client links are shown.
Fig. 180: Monitoring -> WLAN -> Client Links
Values in the Client Links list
Field Description
Description of the client
link
Shows the name of the client link.
AP MAC address Shows the MAC address of the client link partner.
Uptime Shows the time in hours, minutes and seconds for which the cli-
ent link in question is active.
Tx Packets Shows the total number of packets sent.
Rx Packets Shows the total number of packets received.
Signal dBm Shows the received signal strength in dBm.
Noise dBm Shows the received noise strength in dBm.
Data Rate Mbps Shows the current transmission rate of data received on this cli-
ent link in Mbit/s.
Client Link Details
You can use the icon to open an overview of further details of the client links.
19 Monitoring Funkwerk Enterprise Communications GmbH
372 bintec W1002/W1002n/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English