Field Description
If the entry starts with 0x, the generator is deactivated. Enter
a hexadecimal string with exactly the right number of charac-
ters for the selected WEP mode. 10 characters for WEP40 or
26 characters for WEP104 e.g. WEP40: 0xA0B23574C5,
WEP104: 0x81DC9BDB52D04DC20036DBD831
• Direct entry of ASCII characters
Enter a character string with the right number of characters for
the selected WEP mode. For WEP40 you need a string of 5
characters, WEP104 13 characters. For example hello for
WEP40, funkwerk-wep1 for WEP104.
Fields in the Remote Partner menu
Field Description
Remote MAC address Enter the MAC address of the WDS partner.
11.1.4 Client Link
If you operate your device in access client mode (Wireless LAN -> WLANx -> Radio Set-
tings-> ->Operation Mode = Access Client), you can edit the available Client Links
in the Wireless LAN->WLANx->Client Links-> -> menu.
The client mode can be operated in infrastructure mode or in ad-hoc mode.
In a network in infrastructure mode, all clients communicate with each other via access
points only. There is no direct communication between the individual clients.
In ad-hoc mode, an access client can be used as central interface between a number of
terminals. In this way, devices such as computers and printers can be wirelessly intercon-
nected.
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 163
To Next Page
Loading...
Need help?
General
