fields:
Fields in the WDS LinksBasic Parameters menu
Field Description
WDS description Enter a name for the WDS link.
If the Use Standard option is activated, the generated name
of the interface is automatically used.
If the option is not activated, you can enter a suitable name in
the input field.
The Use Standard option is enabled by default.
Fields in the WDS Security Settings menu
Field Description
Privacy Select whether an encryption method is to be used for this WDS
link and if so, which one.
Possible values:
• None (default value): Data traffic on this WDS link is not en-
crypted.
• WEP40: Data traffic on this WDS link is encrypted with
WEP40. In WEP Key 1 - 4, enter the key for this WDS link
and in Transmission Key, select the default key.
• WEP104: Data traffic on this WDS link is encrypted with
WEP104. In WEP Key 1 - 4, enter the key for this WDS link
and in Transmission Key, select the default key.
Transmit Key Only if Privacy = WEP40
, WEP104
Select one of the keys configured in WEP Key <1 - 4> as the
default key.
The default value is Key 1.
WEP Key 1 - 4 Only if Privacy = WEP40, WEP104
Enter the WEP key. There are two ways of entering a WEP key:
• Direct entry in hexadecimal form
11 Wireless LAN Funkwerk Enterprise Communications GmbH
162 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
