Property Value
Printed documentation supplied Quick Reference
Safety notices
R&TTE Compliance Information
Online documentation User's Guide
6.1.3 LEDs
The five LEDs show the radio status, radio activity, Ethernet activity and LED states of your
device. The LED states are indicated by combinations of the LEDs which are explained in
detail in this chapter.
They are arranged as follows:
Fig. 11: LEDs of bintec W1002 and bintec W2002
Fig. 12: LEDs of bintec W1002n
In operation mode, the LEDs display the following status information for your device:
LED status display
LED State Information
State off The power supply is not connected. If
other LEDs are on, also Error.
on (static) Error
on (flashing) Ready
WLAN (1/2) on (flashing slowly) Free
on (static) At least one client is registered
Funkwerk Enterprise Communications GmbH
6 Technical data
bintec W1002/W1002n/W2002/WIx040/WIx065 31
To Next Page
Loading...
