EasyManuals Logo

Funkwerk W1002 User Manual

Funkwerk W1002
437 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
Field Description
The function is enabled by default.
Possible values: 0 65535. Default value: 0.
Inter-ByteGap
Enter the time in ms since receiving the first character, which is
used as a trigger for data transmission.
The function is activated with Enabled.
The function is disabled by default.
Possible values: 0 65535. Default value: 100.
Fields in the Serial PortBuffer menu
Field Description
Delete serial RX buffer Click the Delete button to clear the receive buffer.
Delete serial TX buffer
Click the Delete button to clear the send buffer.
9.3 Relay
Devices of the WI series are fitted with a relay. The rest (i.e. normal/unexcited/fault) state
of the contacts is open. You can choose whether the relay is manually controlled or used
as an alarm relay, coupled with the red error LED. When manually controlled, the state of
the relay is set during booting when the configuration is loaded.
9 Physical interfaces Funkwerk Enterprise Communications GmbH
124 bintec W1002/W1002n/W2002/WIx040/WIx065

Table of Contents

Other manuals for Funkwerk W1002

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Funkwerk W1002 and is the answer not in the manual?

Funkwerk W1002 Specifications

General IconGeneral
BrandFunkwerk
ModelW1002
CategoryWireless Access Point
LanguageEnglish

Related product manuals