Field Description
Possible values are 1 to 65535.
The default value is 15.
CW Max. Not for bintec W1002n
Here, you can define the minimum size of the contention win-
dow.
Possible values are 1 to 65535.
The default value is 1023.
Max. Receive Lifetime Not for bintec W1002n
Enter the time from receipt of the first fragment of a data packet
as of which no further attempts are made. The data packet is
discarded.
Possible values are 1 to 4294967295.
The default value is 512 msec.
Max. Transmit MSDU
Lifetime
Not for bintec W1002n
Enter the time from sending of the first fragment of a data pack-
et as of which no further send attempts are made. The data
packet is discarded.
Possible values are 1 to 4294967295.
The default value is 512 msec.
11.1.2 Virtual Service Sets
If you operate your device in access point mode (Wireless LAN->WLANx-> Radio Set-
tings-> ->Operation Mode = Access Point), you can set up and edit the desired wire-
less networks in the Wireless LAN->WLANx->Virtual Service Sets-> ->/New menu.
Setting network names
In contrast to a LAN set up over Ethernet, a wireless LAN does not have any cables for set-
ting up a permanent connection between the server and clients. Access violations or faults
may therefore occur with directly adjacent radio networks. To prevent this, every radio net-
11 Wireless LAN Funkwerk Enterprise Communications GmbH
154 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
