Field Description
The function is disabled by default.
PPTP Passthrough Select whether the setup and operation of several simultan-
eous, outgoing PPTP connections from hosts in the network are
also to be permitted if NAT is activated.
The function is disabled by default.
If PPTP Passthrough is enabled, the device itself cannot be
configured as a tunnel endpoint.
Portforwardings Shown here is the number of port forwarding rules configured in
Routing -> NAT -> Port Forwarding.
12.2.2 Portforwarding
In the Routing -> NAT -> Portforwarding menu, a list of all NAT interfaces is shown for
which portforwarding has been configured.
12.2.2.1 New
Choose the New button to set up portforwarding for other interfaces.
Funkwerk Enterprise Communications GmbH
12 Routing
bintec W1002/W1002n/W2002/WIx040/WIx065 185
To Next Page
Loading...
Need help?
General
