• Antennas:
- 2 external standard antennas to be screwed on (for bintec WI1065)
- 4 external standard antennas to be screwed on (for bintec WI 2065 and WI 3065)
• CD
• Documentation:
- User's Guide (on CD)
- Quick Install Guide (printed)
- R&TTE Compliance Information (printed)
- Safety notices (printed)
6.3.2 General Product Features
To ensure safe operation, the WI series devices have a connection to earth. The minimum
cross-section of the earth lead should be 1.5 mm². The distance between the device and
the connection to earth should be as short as possible.
The general product features cover performance features and the technical prerequisites
for installation and operation of your device.
The features are summarised in the following table:
General Product Features
Property Value
Variants:
bintec WI1065 One internal wireless module, 2 external antennas
(1x Main, 1x AUX)
bintec WI2065 Two internal wireless modules, 4 external anten-
nas (2x Main, 2x AUX)
bintec WI3065 Three internal wireless modules, 4 external anten-
nas (3x Main, 1x AUX)
Dimensions and weights:
Equipment dimensions without cable
(W x L x H)
257 mm x 285 mm x 60 mm
Weight approx. 1,900 g (3 WLAN modules)
LEDs 8 (1x Failure, 1x Status, 3x WLAN, 2x Ethernet, 1x
Funkwerk Enterprise Communications GmbH
6 Technical data
bintec W1002/W1002n/W2002/WIx040/WIx065 45
To Next Page
Loading...
Need help?
General
