Chapter 19 Monitoring
This menu includes information that enable you to locate problems in your network and
monitor activities, e.g. at your device's WAN interface.
19.1 Internal Log
19.1.1 System messages
In the Monitoring->Internal Log->System Messages menu, a list of all internally stored
system messages is shown. Above the table you will find the configured Maximum Num-
ber of Syslog Entries and the configured Maximum Message Level of Syslog Entries.
These values can be changed in the System Management -> Global Settings -> System
menu.
Fig. 160: Monitoring ->Internal Log->System Messages
Values in the list System Messages
Funkwerk Enterprise Communications GmbH
19 Monitoring
bintec W1002/W1002n/W2002/WIx040/WIx065 353
To Next Page
Loading...
