(b) Number of the wireless module on which the WDS link or bridge link is configured
(c) Number of the WDS link or bridge link
Example: wds1-0 (first WDS link or bridge link on the first wireless module)
The name of the client link is made up of the following parts:
(a) Abbreviation for interface type
(b) Number of the wireless module on which the client link is configured
(c) Number of the client link
Example: sta1-0 (first client link on the first wireless module)
The names of the virtual interfaces connected to an Ethernet port are made up of the fol-
lowing parts:
(a) Abbreviation for interface type
(b) Number of the Ethernet port
(c) Number of the interface connected to the Ethernet port
(d) Number of the virtual interface
Example: en1-0-1 (first virtual interface based on the first interface on the first Ethernet
port)
8.3.1 Interfaces
For each interface, you define separately the bridge group in which it is to operate.
You can choose to use existing bridge groups or create a new bridge group.
By default, all existing interfaces are assigned to bridge group br0. If the option New
Bridge Group is selected for Interface mode / Bridge Groups, a further group, br1,
br2 etc, is automatically set up.
8 System management Funkwerk Enterprise Communications GmbH
98 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
