in the data packets is not interpreted.
Conventions for port/interface names
The names of wireless ports in the user interface of your device are made up of the follow-
ing parts:
(a) WLAN
(b) Number of the physical port (1 or 2)
Example: WLAN1
The name of the Ethernet port is made up of the following parts:
(a) ETH, where en stands for Ethernet
(b) Number of the port
Example: ETH1
The names of the interfaces connected to an Ethernet port are made up of the following
parts:
(a) Abbreviation for interface type
(b) Number of the Ethernet port
(c) Number of the interface
Example: en1-0 (first interface on the first Ethernet port)
The name of the bridge group is made up of the following parts:
(a) Abbreviation for interface type
(b) Number of the bridge group
Example: br0 (first bridge group)
The name of the wireless network is made up of the following parts:
(a) Abbreviation for interface type
(b) Number of the wireless module
(c) Number of the interface
Example: vss1-0 (first wireless network on the first wireless module)
The name of the WDS link or bridge link is made up of the following parts:
(a) Abbreviation for interface type
Funkwerk Enterprise Communications GmbH
8 System management
bintec W1002/W1002n/W2002/WIx040/WIx065 97
To Next Page
Loading...
Need help?
General
