Funkwerk W1002 User Manual

Fig. 183: Monitoring -> WLAN -> Client Links -><Client Link>-> in bintec W1002n
Values in the Client Links list
Field Description
AP MAC address Shows the MAC address of the client link partner.
Uptime Shows the time in hours, minutes and seconds for which the cli-
ent link in question is active.
Signal dBm Shows the received signal strength in dBm.
Noise dBm Shows the received noise strength in dBm.
SNR dB Shows the signal quality in dB.
Data Rate Mbps Shows the current transmission rate of data received on this cli-
ent link in Mbit/s.
Rate Shows separately, for each of the stated data rates, the values
for Tx Packets and Rx Packets.
19.5 Bridges
19 Monitoring Funkwerk Enterprise Communications GmbH
374 bintec W1002/W1002n/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English