Fig. 44: System Management -> Interface Mode / Bridge Groups ->Interfaces
The System Management -> Interface Mode / Bridge Groups ->Interfaces menu con-
sists of the following fields:
Fields in the Interfaces menu
Field Description
# Shows the serial number of the interface.
Interface Description
Displays the name of the interface.
Mode / Bridge Group Select whether you want to run the interface in Routing Mode
or whether you want to assign the interface to an existing ( br0,
br1 etc.) or new bridge group ( New Bridge Group). If you
select New Bridge Group, a new bridge group is created
automatically when you click OK.
Configuration interface
Select the interface via which the configuration is to be carried
out.
Possible values:
• Select one (default value): Ex works setting The right con-
figuration interface must be selected from the other options.
• Ignore : No interface is defined as configuration interface.
• <Interface name>: Select the interface to be used for con-
figuration. If this interface is in a bridge group, it is assigned
Funkwerk Enterprise Communications GmbH
8 System management
bintec W1002/W1002n/W2002/WIx040/WIx065 99
To Next Page
Loading...
