EasyManuals Logo

Funkwerk W1002 User Manual

Funkwerk W1002
437 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
Field Description
Enable this function to reduce the guard interval (= time
between transmission of two data symbols) from 800ns to
400ns.
Short Retry Limit Enter the maximum number of attempts to send a frame of
length less than or equal to the value defined in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are 1 to 255.
The default value is 7.
Long Retry Limit Enter the maximum number of attempts to send a data packet
of length less than or equal to the value defined in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are 1 to 255.
The default value is 4.
Fragmentation
Threshold
Enter the maximum size as of which the data packets are to be
fragmented (i.e. split into smaller units). A low value is recom-
mended for this field in areas with poor reception and in the
event of radio interference.
Possible values are 256 to 2346.
The default value is 2346 bytes.
ED Threshold Not for bintec W1002n
Here, you can define the Energy Detection threshold for CCA
(Clear Channel Assessment).
Possible values are -2147483648 to 2147483647.
The default value is 0.
CW Min. Not for bintec W1002n
Here, you can define the maximum size of the contention win-
dow.
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 153

Table of Contents

Other manuals for Funkwerk W1002

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Funkwerk W1002 and is the answer not in the manual?

Funkwerk W1002 Specifications

General IconGeneral
BrandFunkwerk
ModelW1002
CategoryWireless Access Point
LanguageEnglish

Related product manuals