Funkwerk W1002 User Manual

Field Description
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 20 ms.
Max. Time Period for
Passive Scan
Indicates the maximum time in milliseconds a frequency is act-
ively scanned.
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 120 ms.
Association Advantage
Indicates which priority assigned to the BSS currently connec-
ted to the WLAN client.
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 10.
RSSI Advantage
Indicates which priority is assigned to the signal strength indic-
ator (RSSI) of the BSS.
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 10.
Weight of Age
Indicates the priority of the age of the BSS.
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 5.
Weight of Penalty
Indicates the priority of the penalty of the BSS.
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 10.
Penalty Value
Indicates the value of the penalty of the BSS.
The value can only be changed for Roaming Profile = Custom
Roaming. The default value is 50.
RTS Threshold Here, you select how the RTS/CTS mechanism is to be
switched on/off.
If you choose User Defined, in the input field you can specify
the data packet length threshold in bytes (1..2346) as of which
the RTS/CTS mechanism is to be used. This makes sense if
several clients that are not in each other's wireless range are
run in one access point. The mechanism can also be switched
on/off independently of the data packet length by selecting the
value Always on or Always off (default value).
Short Guard Interval Only for bintec W1002n
11 Wireless LAN Funkwerk Enterprise Communications GmbH
152 bintec W1002/W1002n/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English