Funkwerk W1002 User Manual

Note
If you delete the boot configuration using the Funkwerk Configuration Interface , all
passwords will also be reset and the current boot configuration deleted. The next time,
the device will boot with the standard ex works settings.
On devices of the WI series, there is a further reset button - the HW reset. After pressing
briefly once, the device reboots.
Fig. 10: Underside of the bintec WIx040 with the HW and Cfg reset buttons
Funkwerk Enterprise Communications GmbH
5 Reset
bintec W1002/W1002n/W2002/WIx040/WIx065 25

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English