The features are summarised in the following table:
General Product Features
Property Value
Variants:
bintec W1002 One internal wireless module, 2 external antennas
bintec W1002n One internal wireless module, 3 external antennas
bintec W2002 Two internal wireless modules, 4 external anten-
nas
Dimensions and weights:
Equipment dimensions without cable
(W x L x H)
163 mm x 168 mm x 50 mm
Weight approx. 430 g
LEDs bintec W1002 and bintec W2002:
5 (1x Status, 2x WLAN, 2x Ethernet)
bintec W1002n:
4 (1x Status, 1x WLAN, 2x Ethernet)
Power consumption of the device 5-10 Watt, depending on extensions
Voltage supply External switched-mode power supply 12 V DC,
1.25 A
PoE on Ethernet 1 Class 0 (insulated) with max.
two WLAN modules
Environmental requirements:
Storage temperature -10° to +70 °C
Operating temperature 0° to 40 °C
Relative atmospheric humidity 10 % to 95 % (non-condensing)
Room classification Only use in dry rooms.
Available interfaces:
Serial interface V.24 Permanently installed, supports Baud rates: 1200,
2400, 4800, 9600, 19200, 38400, 57600, 115200
Baud
Ethernet IEEE 802.3 LAN (2-port Permanently installed (twisted pair only), 10/100
Funkwerk Enterprise Communications GmbH
6 Technical data
bintec W1002/W1002n/W2002/WIx040/WIx065 27
To Next Page
Loading...
