Field Description
• Static (default value): You enter a static IP address.
• Provide IP Address: Only for Connection Type = LNS
Your device dynamically assigns an IP address to the remote
terminal.
• Get IP Address: Only for Connection Type = LAC Your
device is dynamically assigned an IP address.
Default Route Only if IP Address Mode = Get IP Address
and Static
Select whether the route to this connection partner is to be
defined as the default route.
The function is activated with Enabled.
The function is disabled by default.
Create NAT Policy Only if IP Address Mode = Get IP Address
and Static
Specify whether Network Address Translation (NAT) is to be ac-
tivated for this connection.
The function is activated with Enabled.
The function is disabled by default.
IP Assignment Pool
(IPCP)
Only if IP Address Mode = Provide IP Address
Select an IP pool.
Local IP Address Only for IP Address Mode = Static
Enter the WAN IP address of your device.
Route Entries Only for IP Address Mode = Static
Enter the Remote IP Address and Netmask of the L2TP part-
ner LAN and the corresponding Metric. Add new entries with
Add.
The Advanced Settingsmenu consists of the following fields:
14 VPN Funkwerk Enterprise Communications GmbH
250 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
