Field Description
The value Any means that neither the destination interface nor
the destination address is checked.
Service Select one of the preconfigured services to which the packet to
be filtered must be assigned.
The extensive range of services configured ex works includes
the following:
• FTP
• TELNET
• SMTP
• DNS
• HTTP
• NNTP
• Internet
• Netmeeting
Other services are set up in Firewall -> Services -> Service
List.
In addition, the service groups configured in Firewall -> Ser-
vices -> Groups can be selected.
Action Select the action to be applied to a filtered packet.
Possible values:
• Access (default value): The packets are forwarded on the
basis of the entries.
• Deny : The packets are rejected.
• Reject : The packets are rejected. An error message is is-
sued to the sender of the packet.
Apply QoS Only for Action = Access
Select whether you want to enable QoS for this policy with the
priority selected in Data Traffic Priority
The function is activated with Enabled.
The option is deactivated by default.
Funkwerk Enterprise Communications GmbH
15 Firewall
bintec W1002/W1002n/W2002/WIx040/WIx065 279
To Next Page
Loading...
Need help?
General
