Field Value
• MD5
• SHA-1
• RipeMD 160
MD5, SHA-1 and RipeMD160 are enabled by default.
Fields in the SSH Key Status menu
Field Value
RSA Key Status The status of the RSA key is displayed here.
If an RSA key has not been generated yet, Not Generated is
displayed in red and a link, Generate, is provided. If you select
the link, the generation process is triggered and the view is up-
dated. The status Generating is displayed in green. When
generation has been completed successfully, the status
changes from Generating to Generated. If an error occurs
during generated, Not Generated and the Generate link are
displayed again. You can then repeat generation.
If the status Unknown is displayed, generation of a key is not
possible, for example because there is not enough space in the
FlashROM.
DSA Key Status The status of the DSA key is displayed here.
If a DSA key has not been generated yet, Not Generated is
displayed in red and a link, Generate, is provided. If you select
the link, the generation process is triggered and the view is up-
dated. The status Generating is displayed in green. When
generation has been completed successfully, the status
changes from Generating to Generated. If an error occurs
during generated, Not Generated and the Generate link are
displayed again. You can then repeat generation.
If the status Unknown is displayed, generation of a key is not
possible, for example because there is not enough space in the
FlashROM.
8 System management Funkwerk Enterprise Communications GmbH
106 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
