Field Value
Compression Select whether data compression should be used.
The function is activated by choosing Enabled.
The function is disabled by default.
TCP Keepalives Select whether the device is to send keepalive packets.
The function is activated by choosing Enabled.
The function is enabled by default.
Logging Level Select the syslog level for the syslog messages generated by
the SSH Daemon.
Possible settings:
• Fatal: Only fatal errors of the SSH Daemon are recorded.
• Errors: Fatal and simple errors of the SSH Daemon are re-
corded.
• Information (default value) Fatal and simple errors of the
SSH Daemon and information messages are recorded.
• Debug: All messages are recorded.
Fields in the SSHAuthentication and Encryption Parameters menu
Field Value
Encryption Algorithms Select the algorithms that are to be used to encrypt the SSH
connection.
Possible options:
• 3DES
• Blowfish
• AES-128
• AES-256
3DES, Blowfish and AES-128 and are enabled by default.
Hashing Algorithms Select the algorithms that are to be available for message au-
thentication of the SSH connection.
Possible options:
Funkwerk Enterprise Communications GmbH
8 System management
bintec W1002/W1002n/W2002/WIx040/WIx065 105
To Next Page
Loading...
