Field Description
The function is activated with Enabled.
The function is disabled by default.
Use Zero Cookies Select whether zeroed ISAKMP Cookies are to be sent.
These are equivalent to the SPI (Security Parameter Index) in
IKE proposals; as they are redundant, they are normally set to
the value of the negotiation currently in progress. Alternatively,
your device can use zeroes for all values of the cookie. In this
case choose Enabled.
Zero Cookie Size Only if Use Zero Cookies = activated.
Enter the length in bytes of the zeroed SPI used in IKE propos-
als.
The default value is 32.
Dynamic RADIUS Au-
thentication
Select whether RADIUS authentication is to be activated via
IPSec.
The function is activated with Enabled.
The function is disabled by default.
Fields in the Advanced SettingsPKI Handling Options menu
Field Description
Ignore Certificate Re-
quest Payloads
Select whether certificate requests received from the remote
end during IKE (phase 1) are to be ignored.
The function is activated with Enabled.
The function is disabled by default.
Send Certificate Re-
quest Payloads
Select whether certificate requests are to be sent during IKE
(phase 1).
The function is activated with Enabled.
The function is enabled by default.
Send Certificate Chains Select whether complete certificate chains are to be sent during
IKE (phase 1).
14 VPN Funkwerk Enterprise Communications GmbH
242 bintec W1002/W1002n/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
