Field Description
• Activate Interface : The interface defined in the Select
Interface field is activated.
• Deactivate Interface : The interface defined in the Se-
lect Interface field is deactivated.
• Activate WLAN: The WLAN interface defined in the Select
Interface field is activated.
• Deactivate WLAN: The WLAN interface defined in the Se-
lect Interface field is deactivated.
• Initiate 5 GHz WLAN Bandscan: The wireless module
selected in Select Wireless Module is scanned in the 5-GHz
frequency band. During the scan, all wireless connections are
interrupted.
• Trigger software update: A software update is initiated.
• Trigger configuration backup: The backup of the
device configuration to a TFTP server is initiated.
Select radio Only if Select Action = Initiate 5 GHz WLAN Bandscan
Select the wireless module to be used for the scan.
Select Interface Only if Select Action = Activate Interface or Deactiv-
ate Interface
or if
Select Action = Activate WLAN or Deactivate WLAN
Select which interface is to be activated or deactivated.
Source Only if Select action = Trigger software update
Select the desired source.
Possible values:
• Current software from Funkwerk server: The latest
software will be downloaded from the Funkwerk server.
• HTTP server: The latest software will be downloaded from
an HTTP server that you define in Update URL.
Update URL Only if Select Action = Trigger software update and
Source = HTTP Server
Funkwerk Enterprise Communications GmbH
16 Local services
bintec W1002/W1002n/W2002/WIx040/WIx065 313