User Manual
19
Configuration
3
3.2 Wireless
3.2.1 WPS Settings
The WPS (Wi-Fi Protected Setup) specification is overseen by the Wi-Fi Alli-
ance and primarily serves to simplify setup and management of security func-
tions for Wi-Fi networks.
The access point supports three WPS configuration methods: Client's PIN,
AP's PIN and Push Button. To enable the WPS function click the check box
ENABLE WPS.
Figure 3-3: WPS settings
PIN Client After selecting the WPS configuration method PIN Client enter the PIN and the
pre-shared key generated from the WPS wireless client on attempting to estab
-
lish connection with the AP. Alternatively, you can enter your own PSK. Click
OK to immediately start the WPS process.
To Next Page
Loading...
Need help?
General
