3
22
User Manual
Configuration
Fields in the General Settings menu
Field Description
OPERATION MODE Define in which mode the wireless module of
your device is to be operated
Selectable parameters:
– Access point:
Your device serves as an access point
in your network.
– Bridge:
Your device serves as a wireless
bridge in your network.
The device can act as a wireless
network bridge and establish wireless
connections to other APs. In this case,
you have to know the MAC address of
the other peer devices, which must also
be in bridge mode.
If two APs are connected in bridge
mode, they form a WDS (Wireless
Distribution System), which allows
computers in a LAN to establish
contact with the computers in another
LAN.
– AP+Repeater:
Select AP+Repeater as operation
mode if the device is to work as an
access point and wireless bridge.
– Wireless Client:
In this mode the device behaves like a
wireless client connected with a
wireless network.
To Next Page
Loading...
