User Manual
31
Configuration
3
PASSPHASE: You can also input the PASSPHRASE manually:
64-BIT WEP: Enter five ASCII characters or 10
hexadecimal values (between 0-9, a-f and A-F).
128-BIT WEP:Enter 13 ASCII characters or
hexadecimal values (between 0-9, a-f and A-F).
152-BIT WEP: Enter 16 ASCII characters or 32
hexadecimal values (between 0-9, a-f and A-F).
TRANSMISSION KEY
(WEP ONLY):
Select one of the keys configured in WEP Key
<1-4> as the standard key.
The default value is Key 1.
AUTHENTICATION SERVER
IP A
DDRESS:
Enter the IP address of the RADIUS server.
PORT NUMBER: Enter the associated port for RADIUS data.
According to RFC 2138, the standard ports
reserved are 1812 for authentication (1645 in
older RFCs) and 1813 for billing (1646 in older
RFCs). You can find out which port is to be
used from the documentation on your RADIUS
server.
The default value is 1812.
SHARED SECRET: Enter your shared password for communication
between the RADIUS server and your device.
REAUTHENTICATION TIME: Here you can enter the time interval within
which the connection is reauthenticated.
The default value is 3600.
GLOBAL KEY UPDATE Here you can define whether the key to protect
the connection is renewed at regular intervals.
You can select between renewal after a certain
period of time or on receipt and/or transmission
of a certain number of packets.
The default status of this function is disabled.
Field Description
To Next Page
Loading...
Need help?
General
