EasyManua.ls Logo

Funkwerk W500 - Page 83

Funkwerk W500
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Precautions
83
Safety Precautions
6
Please make sure you follow the correct cabling sequence as described in
the Quick Install Guide.
Please check whether the cable connections are correct - in particular the
ISDN and LAN cables - before you start operating your gateway. The ISDN
connection of your gateway must not be connected to the Ethernet connec
-
tion of your PC or hub, and the LAN connection of your gateway must not
be attached to your ISDN connection.
Only use the cables enclosed or specified for cabling - as described in the
manual. If you use other cables, Funkwerk Enterprise Communications
GmbH shall not accept any liability for any damage occurring or for any ad
-
verse effects on the functions.
Please arrange the cables in such a way that they are no hazard (danger
of stumbling) and cannot be damaged.
Do not connect, disconnect or touch the data transmission lines during
thunderstorms.
Intended use and
operation
Your gateway is intended for use in an office environment. As a multi-pro-
tocol gateway, your gateway establishes WAN connections in keeping with
the system configuration. In order to avoid extra charges, it is imperative to
carefully monitor the unit.
Your gateway meets the relevant safety regulations for IT equipment when
used in an office environment. If you have any questions as to whether the
gateway can be set up in the intended environment, please get in touch with
your funkwerk dealer or with the funkwerk Customer Support Department.
The intended operation of the unit in keeping with European standard
EN
60950 shall be ensured only when the unit cover has been fitted (cool-
ing, fire protection, radio interference suppression).
The ambient temperature should not exceed +50 deg. Celsius. Avoid expo-
sure to direct sunlight. Ensure sufficient cooling.
Make sure no foreign objects (such as paper clips) or liquids get into the in-
side of the unit (electric shock, short-circuit).
Make sure that ventilation slits and orifices of the unit are not blocked.

Table of Contents

Related product manuals