3-1
3. INITIAL SETTINGS
This chapter shows you how to setup the equipment. Some procedures require entry
of job no. and password. Ask your dealer.
3.1 How to Set the IMN (INMARSAT MOBILE NO.)
Set your IMN (Inmarsat Mobile No.) as shown below.
1. Turn the power on.
2. Press the function key [F8] to show the [Setup] menu.
3. Press 1 key to display the [System Setup] menu.
4. Confirm that [IMN] is selected, and then press the Enter key.
An input box appears.
5. Key in your IMN.
6. Press the Enter key.
To clear the IMN, select [IMN], then press I, M, N while pressing the Alt key.
7. Press the Esc key.
8. Press the Enter key.
Setup
File Edit Transmit EGC Reports Logs Options Setup Distress StopAlarm
1. System Setup
2. Editor Setup
3. Terminal Setup
4. EGC Setup
5. Auto Mode Setup
6. E-Mail Setup
7. Directories
8. Configuration
Setup
System Setup
01:53 12-02-25 (YY-MM-DD)
INMARSAT-C
EXT
ON
INT
INT
System Date & Time
IMN
MES Operation Mode
Nav Port
LAN Port
Message Output Port
EGC Output Port
Network Setup
Command Window
To Next Page
Loading...
Need help?
General
