4. HOW TO INSTALL OPTIONAL EQUIPMENT
4-7
4.3 Waterproofing Kit OP16-60/OP16-67/OP16-68
To mount the IC-318, IC-305 and IC-307 on a bulkhead, use the optional waterproof-
ing kit to keep water splash out of the unit
OP16-60 (for IC-318)
OP16-60 (Code No.: 001-180-090)
When the OP16-58 (described in paragraph 4.2.1) is used, replace the cable from the
IC-318 with the XM-FD-361 as shown below.
Name Type Code No. Qty
Cover gasket 16-023-5502 100-373-530-10 1
Grommet 16-023-5503 100-373-540-10 1
Attach the grommet
to this notch.
Cable assy.
XM-FD-361
Attach the cover
gasket to here
(reverse side).
Pan head screw
(M4x8, 2 pcs.)
# Color
1 Blue
2 Brown
3 Purple
4 Gray
5 -
6 Green
7 Yellow
8 Orange
9 Pink
10 Light-green
11 White (w/black dots)
12 White (w/red dots)
13 Black
14 Red
15 Light-blue
To Next Page
Loading...
