Furuno FELCOM18 - Page 31

4. HOW TO INSTALL OPTIONAL EQUIPMENT
4-5
DGPS port
(Coaxial cable connected)
Pass the coaxial cable
through the slit on the cover
for BNC (16-023-3534).
Attach the connector* of the
coaxial cable to the DGPS
port.
USB suppor
USB suppor
1
2
Cover for BNC
Cover for BNC
Slide the cover for BNC on
the connector to cover the
connector. Confirm that the
triangle mark on the cover is
upward.
3
Triangle mark
Triangle mark
*For waterproofing, use the
connector assy. shown below:
-BNCP-58U-BNCP L-200
(000-161-953-11)
-BNCP-58U-BNCP L-290
(000-175-274-11)