Furuno FSV25 - SYSTEM CONFIGURATION

iii
SYSTEM CONFIGURATION
200-220 VAC,
3ø, 50/60 Hz
External
monitor
External
monitor
Processor unit
FSV-2503 (FSV-25)
FSV-2503S (FSV-25S)
External USB devices
NMEA IEC61162-1 device
NMEA IEC61162-1 device
Junction box FI-5002
External speaker
Sub control unit
FSV-853
Control unit
FSV-2501
Remote controller
FSV-2504
Remote controller
FSV-2504
Raise/Lower
control box*
FSV-2530
Junction box
FSV-2550
12-24 VDC
Rectifier
RU-1746B-2
100/110/115/
220/230 VAC
1ø, 50/60 Hz
100/110/115/
220/230 VAC
1ø, 50/60 Hz
Interface unit
FSV-8502
Transceiver unit
FSV-251
Power supply
unit
FSV-252
* The raise/lower control box can be installed within a 5 m radius of the hull
unit where normal operation is not feasible. Use the optional Control Box
Extension Box (FSV-2560) to extend the distance between the units.
Hull unit
FSV-253
(1200mm travel)
FSV-254
(1600mm travel)