Furuno GP-25 - SPECIFICATIONS OF GPS;WAAS PLOTTER GP-25; General Specifications for GP-25; GPS;WAAS Receiver Specifications; Plotter Function Specifications

FURUNO GP-25
SP - 1 E4480S01D
130823
SPECIFICATIONS OF GPS/WAAS PLOTTER
GP-25
1 GENERAL
1.1 Screen 5-inch TFT color LCD, 800 x 480 dots
1.2 Display mode Plotter display
1.3 Projection Mercator
1.4 Useable area 80 latitude or below
1.5 Brilliance 500 cd/m
2
typical
1.6 Language Bahasa Malaysia, Bahasa Indonesia, Chinese, English, Thai,
Vietnamese
2 GPS/WAAS RECEIVER
2.1 Receiving channels GPS: 12 channels, SBAS: 1 channel
2.2 Rx frequency 1575.42 MHz
2.3 Rx code C/A code, SBAS
2.4 Position fixing system All in view
2.5 Accuracy
GPS 10 m (2drms)
SBAS 3 m (2drms)
2.6 Update interval 1 s
2.7 SBAS WAAS, EGNOS and MSAS
3 PLOTTER FUNCTION
3.1 Effective projection area 0.125 NM to 2,048 NM (at equatorial area)
3.2 SD/SDHC card 32 GB max., C-MAP NT+/MAX chart
3.3 Track display Plot interval: by time or distance
3.4 Memory capacity Track: 30,000 points, Point: 30,000 points,
Course: 200 routes
4 INTERFACE
4.1 Data format IEC 61162-1
4.2 Data sentences
Input DBT, DPT, DSC, DSE, MTW, TLL, VHW
Output AAM, APB, BOD, BWC, GGA, GLL, GNS, RMB, RMC, VTG, XTE,
ZDA
4.3 USB USB1.1/2.0 (for maintenance)
5 POWER SUPPLY
12-24 VDC: 0.24-0.12 A