1. OPERATIONAL OVERVIEW
1-22
1.13 Navigation Data Boxes
The navigation data boxes, displayed at the bottom of the screen, show various navi-
gation data fed from the sensors connected to your system.
Note: Information that is used for navigating to a destination, for example, bearing or
distance to waypoint, is available only when you are navigating to a point or route.
Bars (--) are shown in the respective box when the data is not available.
1.13.1 How to display the navigation data box
You can display the navigation data box from the [Menu] and [Home]. When using
[Home], you can select the number of boxes to show (two or four), and large or small
boxes can also be selected for two boxes.
How to display the navigation data box from [Menu]
Open [Menu] and tap [Nav Data] to toggle the navigation data box ON or OFF. The
lamp on the left is green when the function is ON; gray when OFF.
How to display the navigation data box from [Home]
1. Open [Home] and tap the [General] menu icon to show the [General] menu.
2. Tap [Data Box Number].
3. Tap the number of boxes as appropriate.
1.13.2 How to select the data to display in a box
1. Tap the box you want to change the data. The [Select Data] window appears.
Reset *
* Appears when the [Trip] data box is tapped.
Tap to reset the trip distance displayed in [Trip] data box.
To Next Page
Loading...
