3. POINTS
3-3
2. Tap [Points] to show [Points List].
3. Tap [New] (at the bottom of the screen). The point is saved at the own ship's po-
sition.
4. Follow the procedure in section 3.5.2 to edit the point.
5. Tap [Exit] (at the bottom of the screen) to close [Points List].
3.3 Point Symbol Pop-up Menu
A pop-up menu is available with point symbols. You can do the functions listed below
from the pop-up menu.
The pop-up menu items change depending on the state of a point symbol, active or
inactive.
Active point symbol pop-up menu (Set as destination)
• [Move]: Move a point symbol.
• [Skip]: Skip the selected route. [Unskip] is displayed if you tap the point to be
skipped. Tap [Unskip] to cancel skipping.
• [Stop]: Stop navigation to a point symbol.
• [Restart]: Restart navigation to a point symbol.
Active point symbol
pop-up menu
(Set as destination)
Active point symbol
pop-up menu
(Point in route)
Inactive point symbol
pop-up menu
To Next Page
Loading...
