2-1
2. TRACK
Your boat’s track is plotted on the display. This section shows you how to process
track, from how to show or hide the track to how to change its color.
2.1 How to Start or Stop Recording Track
By pop-up menu (1)
Open [Menu] and tap [Track] to toggle the track display ON or OFF. The lamp on the
left is green when the function is ON; gray when OFF.
By pop-up menu (2)
Tap the own ship icon to show the pop-up menu and tap [Record Track] to turn the
track display ON or OFF. The lamp on the left is green when the function is ON; gray
when OFF.
By [Home]
1. Open [Home] and tap the [Plotter] menu icon.
2. Tap [Track] to show the track menu screen.
3. Tap [Record Track] and select [Off].
4. Tap outside the menu screen to close the menu.
5. Tap [Exit] to close [Home].
To resume recording, select [On] at step 3.
2.2 How to Select Recording Method, Recording In-
terval
You can select the boat's track interval from time or distance. For distance, a shorter
interval provides better reconstruction of the track, but the storage time of the track is
shortened. When the track memory becomes full, the oldest track is erased to make
room for the latest.
How to select the recording method
1. Open [Home] and tap the [Plotter] menu icon.
2. Tap [Track] to show the track menu screen.
3. Tap [Track Recording Method] and select [Time] or [Distance].
How to select the recording interval
1. Open [Home] and tap the [Potter] menu icon.
2. Tap [Track] to show the track menu screen.
3. Tap [Time] or [Distance] according to the item selected at “How to select the re-
cording method”, and then select the desired recording interval.
To Next Page
Loading...
