Furuno GP-25 - Selecting Output Data Formats

9. OTHER FUNCTIONS
9-2
9.3 How to Select Output Data
This equipment outputs data in NMEA 0183 format.
9.3.1 How to select output data
1. Open [Home] and tap the [Interface] menu icon.
2. Tap [Select Output].
3. Select the option, referring to the list shown below.
REM1/REM2: Output data to radar, echo sounder.
AP: Output data to an autopilot.
GPS: Output GPS data (used for service).
NMEA Output Sentence
REM1/REM2: Radar, echo sounder, etc.
AP: Autopilot
*: Not output when no waypoint is set.
**: Talker; GP
Format** REM1 REM2 AP GPS
AAM* ON
APB* ON
BOD* ON
BWC* ON ON
GGA ON ON ON
GLL ON ON
GNS ON
RMB* ON ON
RMC ON ON
VTG ONONONON
XTE ON
ZDA ONONON