1. OPERATIONAL OVERVIEW
1-12
1.6 The Cursor
1.6.1 How to display the cursor
When you tap the plotter display, the cursor is displayed on the place you tapped and
the display is scrolled to put the cursor at the center of the display.
Scroll the chart in the following conditions.
• Your vessel is not in the current area.
• Take a look at another area.
• Enter a waypoint at another location.
Cursor pop-up menu
When you tap the cursor, the pop-up menu is displayed. You can do the following
functions from the pop-up menu.
• [Save Point at Cursor]: Enter a point at the cursor position.
• [Quick Navigation]: Start quick navigation to a quick point.
• [Save Point at Own Ship]: Enter a point at the own ship position.
• [Information]: Display the [Object Information] window. (Available when the cursor
is on a object.)
To Next Page
Loading...
