5. NAVIGATION
5-3
After you select a route the following occurs:
• A line with arrows runs through the route points. The line shows the shortest path
to the destination and the arrows indicate the direction to go to the destination.
• The arrival area, the radius of which is set with the arrival alarm, is shown with a red
dashed circle. When the vessel comes within the arrival area of the destination point
or the vessel moves through an imaginary perpendicular line that crosses through
the center of the destination point, the alarm sounds and the arrival alarm icon ap-
pears at the top of the screen to alert you. The alarm sounds only for destination
points. It does not sound for other points. See the description on page 5-1.
5.4 Functions Available in Navigation
5.4.1 How to show the functions for navigation
There are several methods to show the functions: Pop-up menu for [Routes List], pop-
up menu for the [Route Edit] screen, own ship pop-up menu, point symbol pop-up
menu and [Menu].
Pop-up menu for the Routes List
Long tap a route from [Routes List]. The pop-up menu for [Routes List] is displayed.
Arrival area
XTE alarm line
Navigation line
PT00001
Route point
PT00002
PT00003
To Next Page
Loading...
