Furuno GP-25 - Following Routes in Reverse Order; Stopping Navigation; Starting Navigation from a Route Point; Skipping Legs in a Route

5. NAVIGATION
5-6
5.4.3 How to follow a route in reverse order
You can follow the route points of a route in reverse order. This feature is useful when
you want to retrace a route.
Pop-up menu for the Routes List
1. Open the pop-up menu and tap [Routes] to show [Routes List].
2. Long tap the route in navigation to show the pop-up menu and tap [Reverse].
5.4.4 How to stop following a route
Own ship pop-up menu
Tap the own ship icon to show the pop-up menu and tap [Stop].
Point symbol pop-up menu (Set as destination)
Tap the point symbol to show the pop-up menu and tap [Stop].
[Menu]
Open [Menu] and tap [Routes] to show the routes menu item and tap [Stop].
5.4.5 How to start navigation from a point on a route
Depending on your position, objective, etc., you may want to skip some route points
on a route and start navigating directly from a specific point.
Point symbol pop-up menu (Point in route)
Tap the point symbol to show the pop-up menu and tap [Activate From].
5.4.6 How to skip a leg in a route
When you don’t need to follow all route legs in a route you can skip unnecessary ones.
After you select the leg to skip, the route is re-drawn, with the skipped leg removed.
Point symbol pop-up menu (Point in route)
Tap the point symbol to show the pop-up menu and tap [Skip].
[Unskip] is displayed if you tap the point to be skipped. Tap [Unskip] to cancel skip-
ping.
Pop-up menu for the Route Edit screen
1. Open the pop-up menu and tap [Routes] to show [Routes List].
2. Long tap the route in navigation to show the pop-up menu and tap [Edit] to show
the [Route Edit] screen.
3. Tap the point you want to skip from the left list to show the pop-up menu for the
[Route Edit] screen and tap [Skip].
[Unskip] is displayed if you tap the point to be skipped. Tap [Unskip] to cancel skip-
ping.