Fusion FusionServer 5288 V5 - Drive Numbering

FusionServer 5288 V5 Server
Technical White Paper
5 Hardware Description
Issue 07 (2023-04-30)
Copyright © xFusion Digital Technologies Co., Ltd.
35
Configuratio
n
Maximum
Number of
Front Drives
(pcs)
Maximum
Number of
Rear Drives
(pcs)
Maximum
Number of
Built-in
Drives (pcs)
Common
Drive
Management
Mode
drives
⚫
a: When the rear drives (slot 32 to slot 35) are configured with NVMe drives, the
location of IO module 1 needs to be fixed with an NVMe adapter card and cannot
be configured with hard drives.
⚫
b: I/O module 3 supports SAS/SATA drives only when the Avago SAS3416iMR
RAID controller card is configured.
⚫
c: When internal drives are configured, rear drives (slots 32 to 35) cannot be
configured with NVMe drives.
⚫
d: Built-in drives are supported only when the Avago SAS3416iMR RAID
controller card is configured.
⚫
e: The front drives and I/O module 2 are managed by one RAID controller card,
and the rear drives are managed by another RAID controller card.
⚫
Contact your local sales representative or use the Compatibility Checker to
determine the components to be used.
5.5.2 Drive Numbering
⚫
Single-RAID configuration