power of the PSUs is greater
than that of the server.
⚫
If only one PSU is used,
Predicted PSU Status cannot
be set to Active/Standby on
the iBMC WebUI.
5.3 Processor
⚫
The server supports one or two processors.
⚫
If only one processor is required, install it in socket CPU1.
⚫
The same model of processors must be used in a server.
⚫
Contact your local sales representative or use the Compatibility Checker to
determine the components to be used.
Figure 5-7 Processor positions
To Next Page
Loading...
