FUTABA 12FG - Edit keys operation

15
<Before Use>
LCD screen:
7KH/&'VFUHHQFRQWUDVWFDQEHDGMXVWHGE\
using the system menu screen setting [DISPLAY].
EDIT dial:
Movement of the cursor on the menu screen and
movement of the cursor among items on a setup
screen can be controlled by turning the EDIT dial
to the left and right. You can also go to the next
page, if there is a next page.
At data input, value input, mode selection, and
similar operations can be performed by turning the
EDIT dial to the left and right. (Value, ON, OFF,
INH, ACT, etc.)
EDIT button:
Push the EDIT button when you want to open
a setup screen or to switch between cursor move
mode (reverse display) and data input mode (box
display).
This button can also be used as the EDIT button
when a confirmation message is displayed on the
screen, etc.
S1 button:
When there is a next page on a menu screen or
setup screen, you can go to that page by pushing
the S1 button. In this case, the cursor moves to the
screen title item (excluding a part of function.)
Exiting setup screen:
To end operation on a setup screen and return to
the menu screen, move the cursor to the screen title
item and push the EDIT button.
To return to home screen directly, push the S1
button for 1 second.
Also move the cursor to the screen title item and
push the EDIT button to return to the home screen
from a menu screen.
Edit keys operation
Data input operation is performed using the EDIT dial/EDIT button, and S1 button.
Ɣ%XWWRQ6
Ɣ'LDO(',7
Ɣ%XWWRQ(',7
Ɣ/&'VFUHHQ