100
<Linkage Menu>
Model 1 Condition 1
85%
Date Reset
Direct Key Model Menu Setting All Model SettingT1~T6, CD
Function Name
●Return to Linkage Menu
● Touch the [Data Reset] button in the Linkage Menu
to call the setup screen shown below.
Data Reset
Model memory setting data reset. (by item)
This function is designed to allow you to reset
selected portions or all of the settings saved in
the active model memory. You may individually
choose to reset the following sets of data;
T1~T6, CD:
Reset the digital trim setting.
*All the conditions, or the condition currently being displayed
(the entire group for group setting), can be selected.
Direct key:
Resets direct key assignment.
Data Resetting
1. Touch the desired button to reset the data.
2.Perform the data reset according to the
instructions displayed on a screen. When
complete, touch the Data Reset button to
exit.
Model menu setting:
Resets all the functions in the Model Menu
except Condition Select.
All model setting:
Resets all Linkage and Model Menu functions
except for System Type, Model Select, and Model
Type.
Function Name:
A function name is reset.
Default setting of the motor channel will be
reversed once a reset is complete.
To Next Page
Loading...
