FUTABA T18MZ FASSTest-2.4GHz - The Example for Choosing System Type

79
<Linkage Menu>
-Responsespeedhas
priorityovernumber
ofchannels
-Telemetryrequires
onlythecurrent
receiverbattery
-Wanttousea
previouslyused
receiverasis
-Wanttousea
miniaturereceiver
forindoorplanes
-Wanttousean
S-FHSSsystem
miniaturereceiver
FASSTest18CH
FASSTest12CH
FASSTMULTI
FASST7CH
S-FHSS
R608FS
R6008HS
R6108SB
R6208SB
R6014HS
R6014FS
R6203SB
R6203SBE
R6202SBW
R7008SB
R617FS
R6004FF
R616FFM
R6106HF
R6106HFC
R6203SB
R6203SBE
R6202SBW
R2006GS
R2106GF
R2008SB
R7008SB
(
Usablereceivers)
-Wanttousemorechannels
-Wanttousealargenumber
oftelemetryfunctions
(ThetimeofDecember,2011)
System Type
■ FASSTest 18CH ---
■ FASSTest 12CH ---
■ FASST MULTI ---
■ FASST 7CH --- FASST-7CH system receiver mode. Up to 7 channels can be used.
■ S-FHSS --- S-FHSS system receiver mode. Up to 8 channels can be used.
FASSTest system receiver mode. Applicable with the telemetry sensor unit. Up to
18 channels (linear 16+ON/OFF2) can be used.
FASSTest system receiver mode. Applicable with receiver voltage display. Up to 12
channels (linear10+ON/OFF2) can be used. Telemetry Sensor cannot be used, but
the response speed is a faster than that of the 18CH mode.
FASST-MULTI system receiver mode. Up to 18 channels (linear 16+ON/OFF2) can
be used.
The example for choosing System Type